DOD SR400D Dokumentacja Pobierz pdf (Strona 234)

226

PERFORMANCE CHECK LIST FOR THE

AG- SPRAYER

MODEL AG-25 SPEL

25-GALLON HYDRAULIC SPRAYER

(NSN- 370-01-454-1981)

SETUP PROCEDURES

 1. This sprayer runs on a 12-volt system ONLY: ATV-

BEECO PRO-MIST Deep cell, HUMVEE battery

(battery located on left side). Use a multi-meter to

be sure of 12-volt system.

 2. Check the entire sprayer thoroughly, prior to use

for wear areas, such as tighten and clean battery

cables (maintenance free battery), cracks in tank,

hoses, pump, filter housing, frame and all hose

clamps, etc.

 3. Hook up power cable to a 12-volt battery. Hook up

the RED ( POS + ) first and the BLACK ( NEG - )

last . Test pump operation by briefly turning on the

switch at the rear of the pump.

 4. Put 2-3 gallons of water in the tank. Turn on the

pump at the switch and test for leaks. Tighten all

loose clamps and plastic tube fittings. These units

will not pump if the pick up tube fittings are loose.

You may occasionally have to fill the pick up tube

with water by adding it to the filter strainer in order

to create suction. Caution: The pressure is Factory

Set at 60 psi. The black by-pass valve handle must

be cross-linked to pressurize the hose and gun.

1 2 ... 229 230 231 232 233 234 235 236 237 238 239 ... 243 244

Brak uwag

DOD SR400D Dokumentacja Strona 234