DOD SR400D Dokumentacja Pobierz pdf (Strona 114)

106

 3. Check the oil level with the engine dipstick located

at rear of engine and fill to full mark on dipstick with

30-weight HD oil.

 4. Check the oil level in the pump, plug located at

right side base of pump and fill to bottom of plug

threads with 30-weight oil.

 5. Check the belt tension midway between the engine

and pump. Properly maintained belts should

deflect

inches. NEVER ATTEMPT TO

CHECK THE BELTS WHILE THE ENGINE IS

RUNNING.

 6. Grease the two agitator bearing fittings located at

the rear of tank and the right front of tank next to

the pump. Use multipurpose lithium based grease

in a hand operated-gun.

 7. Unscrew and examine the star screen filter and

clean as needed. The filter housing is located

between the engine and pump.

 8. Ensure that the three “inline” valves, located at the

base of the surge tank, adjacent to pressure relief

valve, and on hose reef spindle (yellow handled

lever), are in the OFF position.

 9. Ensure that the pressure relief valve, located

adjacent to the star screen filter housing, is backed

out and then tightened slightly so that it will not fall

out.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 243 244

Brak uwag

DOD SR400D Dokumentacja Strona 114