DOD SR400D Dokumentacja Pobierz pdf (Strona 208)

200

 24. Turn on the pump at the instrument panel.

 25. Adjust the pesticide flow rate as recommended on

the pesticide label by dialing the recommended

ounces per minute onto the LED readout on the

instrument panel. Monitor the setting throughout

the operation.

 26. The rate of speed during the spray operation is

generally 5 or 10 mph. The correct speed for each

type of pesticide specified on the pesticide label.

 27. When stopping for a short period of time, turn off

the pump at the instrument panel.

 28. When there are to be longer delays in operations,

FIRST turn off the pump and then switch the

throttle control on the instrument panel down to

"IDLE".

TERMINATING PROCEDURES

 29. After completing your spray operation, turn the 4-

way valve on the control module to "FLUSHING".

 30. Resume operations at full engine speed and reset

the "LED" readout to 10 ounces per minute flow

rate. Run the machine for a minimum of 2 minutes.

 31. Turn the pump switch, on the instrument panel to

"Off".

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 243 244

Brak uwag

DOD SR400D Dokumentacja Strona 208