DOD SR400D Dokumentacja Pobierz pdf (Strona 202)

194

OPERATING PROCEDURES

 20. Turn the 4-way valve on the control module to the

"PESTICIDE" position.

 21. Check the blower pressure gauge. If the gauge

does not read between 4.5 and 6.0 psi, then adjust

the engine speed by turning the throttle set screw,

located on the carburetor.

 22. YOU ARE NOW READY FOR A ULV

APPLICATION

 23. Turn on the pump at the instrument panel.

 24. Calibrate the machine. Adjust the flow rate by

removing the instrument panel cover and then

gently twisting the blue pointer under the pump up

or down.

 25. Adjust the pesticide flow rate as recommended on

the pesticide label by dialing the recommended

ounces per minute. Monitor the setting throughout

the operation through the "LED" readout on the

instrument panel.

 26. The rate of speed during the spray operation is

generally 5 or 10 mph. The correct speed for each

type of pesticide is specified on the pesticide label.

 27. When stopping for a short period of time, turn off

the pump at the instrument panel.

1 2 ... 197 198 199 200 201 202 203 204 205 206 207 ... 243 244

Brak uwag

DOD SR400D Dokumentacja Strona 202